30 years of mold experience β site only has 5 pages
"We have built thousands of molds. The website has three pages: company intro, equipment, contact. Clients cannot see our depth and assume we're new."
MOLD DEVELOPMENT
A mold maker's website should
A mold maker's website should
express your precision tier clearly.
Mold-type display + precision case studies + equipment list + multilingual structure. ChatGPT recommends you. OEM buyers build trust before the RFQ. Sales does not re-explain.
COMMON PAIN POINTS
What mold makers say behind closed doors
Mold is deeply technical. Pain points trace back to "technical depth not seen."
Medical device molds are our strength β site doesn't say
"We have ISO 13485:2016 and 50+ medical device molds. The website doesn't mention medical. Medical buyers Googling Taiwan mold makers β invisible to us."
International OEM asks about equipment β info not on site
"Japanese and US OEM buyers ask 'can you do 32-cavity molds, do you have Moldflow analysis, what's your measurement precision.' Site has none of it. Sales writes long emails to explain every time."
ChatGPT lists Taiwan mold makers β we are not on it
"OEM procurement is starting to use ChatGPT. Ask 'precision injection mold makers in Taiwan' β the list is competitors with website content. Our capability outweighs theirs, but the AI era leaves us invisible."
OUR SOLUTION
Four things YingCe builds for mold makers
Translate decades of capability into a website that OEM buyers can evaluate at a glance.
Complete mold-type categorization
Injection / die casting / stamping / blow / silicone β each category has its own page. Cavity counts (single / multi / family / two-shot), precision tiers, applicable industries. Clients self-classify.
Equipment + design capability structured
CNC machines, EDM, wire cutting, CMM measurement instruments β listed. Design software PRO/E, SolidWorks, UG, Moldflow analysis capability β explicit. Technical leads see your tier. Schema-structured for ChatGPT.
Mold cases: from trial to production
Each case: mold type, cavity count, product photo, mold steel (NAK80 / S136 / 718H), precision spec, output volume, customer industry. Buyers see your real precision tier in one page. Disclosure boundaries discussed.
GEO: cited by ChatGPT as a mold supplier
Schema.org (Service, Product, FAQPage, Organization) + mold fact density + certifications (ISO 13485, IATF 16949) + multilingual alignment. When a buyer asks ChatGPT for "Taiwan precision injection mold maker for medical devices" β you appear.
CHECKLIST
Eight essentials for a mold maker website
Less than 5 = strongly consider redesign.
- Mold type categorization: injection / die casting / stamping / blow / silicone β at least 2-3 main types.
- Cavity count and precision tier: e.g. "single to 64-cavity family molds, precision Β±0.005mm".
- Equipment list: CNC (brand and axes), EDM, wire cutting, CMM, Moldflow workstation.
- Design software: PRO/E, SolidWorks, UG NX, CATIA, Moldflow, Cimatron.
- Certifications: ISO 9001 (baseline), ISO 13485 (medical), IATF 16949 (automotive), UL (electrical).
- Customer industries: consumer electronics, medical, automotive, packaging, optics, 5G.
- Mold cases: product photo + mold steel + cavity count + customer industry (anonymized OK).
- Inquiry form with mold drawing / product drawing upload: PDF / STEP / IGES / DWG β minimum PDF + STEP.
CASE EXAMPLE
Before vs after: mold maker redesign
North Taiwan precision mold maker, 40 years experience, ISO 13485, medical and consumer electronics precision injection molds.
Before
- Chinese + minimal English, 5 static pages (built 2015)
- "Equipment" page has 3 machine photos, no models
- No mold cases, no industry categorization
- AI readability score: 36 / 100
- Monthly OEM inquiries: 2-4 (mostly referrals)
After (5 months live)
- Chinese + English + Japanese, 40 pages with 22 mold cases
- 5 mold-type category pages
- Equipment list + design software + Moldflow case display
- AI readability score: 88 / 100
- Monthly OEM inquiries: 15-22 (40% medical, 30% Japanese)
FAQ
Questions mold makers ask
How is a mold maker website different from a regular company site?
Differences: mold-type display, cavity capability tiering, customer industry fit, design capability proof. Mold buyers will check the mold types you have made (injection / die casting / stamping / blow), cavity counts (single / multi / family mold), precision tier (general / precision / ultra-precision), and customer industries (medical / consumer electronics / automotive / packaging). A generic 'contact us' page is skipped.
Molds are high-ticket low-volume β do we need a website?
Even more so. A precision mold quote runs NT$500k to NT$5M+. Decision cycles are 3-6 months. Buyers research your capability deeply before sending an RFQ. The website is the first stop of trust, not an advertising channel. Without a real website, big clients won't even RFQ you.
What should a mold maker website show?
Eight essentials: mold types, cavity count and precision tier, equipment list, design software, certifications, customer industries, mold cases, inquiry form with drawing upload.
We make medical device molds β clients are strict about confidentiality. Can we show cases?
Yes, anonymized: client name redacted (e.g. "a US medical device firm"), product type disclosed (e.g. "precision implant locking component"), mold technical details disclosed (NAK80, 8 cavities, Β±0.005mm precision), customer identity hidden. YingCe walks through each case for disclosure boundaries. For medical clients, seeing "similar precision tier" is enough β no need for client names.
Budget for a mold maker website?
YingCe packages: Standard NT$220,000-320,000; Complete (ZH+EN+JP) NT$350,000-550,000; Flagship NT$550,000-850,000. Maintenance NT$2,000-6,000/month.
We do mold + injection one-stop β can the website cover both?
Yes, and recommended. Mold + injection one-stop is exactly what OEM procurement wants (one supplier for everything). YingCe structures the website as a story: mold design β trial β production injection β post-processing. Stronger competitive position than mold-only or injection-only shops. Shi Gong Corporation is exactly this case (precision plastic injection + mold development + post-processing).
Should Moldflow analysis capability be shown on the website?
Yes, absolutely. Moldflow is a critical signal for big OEM buyers evaluating your precision mold capability. Add Moldflow analysis screenshots + outcomes to your case pages (e.g. "optimized gate location reduced warping by 65%"). 10x stronger than just saying "we have Moldflow." YingCe re-visualizes Moldflow results into marketing assets for you.
RELATED
Related reading
YOUR FACTORY
Is your mold shop website
Is your mold shop website
ready for OEM trust?
Enter your URL. AI readability and SEO dual-score in 30 seconds. Find out how many of the 7 OEM buyer trust signals you hit.